INDUSTRIAL JOB OPENINGS

 

Job Title	Location	Salary	Job Description/Requirements
ASME Code Welders	OKC	$17-19/hr+DOE	Will be welding on pressure vessels, cutting hole location placement of nozzles, welding internal components inside the vessel and installing head assemblies on the vessel. These welders will be required to pass an internal code test to be approved for welding on pressure vessels. Vessel sizes range from 3/8" thick to 1 1/4" thick and the lengths are from 90" to 120" long. Will be required to adhere to all ASME code requirements for welding these vessels. Will be required to read welding procedures along with welding symbols. If the code requires these welders could be subject to X-Ray as a means of testing their welds. All candidates must be able to read a tape measure and interrupt blue prints. Must have at least 2 years experience with Mig welding. Will need steel-toed boots and able to lift 50lbs. 1st Shift Mon-Fri 5:30AM to 3:00PM with some overtime required. 2nd Shift Sun-Thurs 2:30PM to Midnight with some overtime required. There is no shift differential.
Automotive/Industrial Painter	OKC	$12/hr+DOE	Person will work in the Paint Department preparing trucks/vans for delivery. Will prep, tape, sand and paint trucks/vans and other units for final delivery. Must have experience with Sander and basic body work. Painting experience required. Can be automotive or industrial experience. Person is required to read a tape measure and lift up to 50lbs. Must be able to work in a dusty environment and able to wear a respirator. Must be able to pass a respirator test. Will need reliable transportation and a valid driver's license. MUST be able to work overtime.
CNC Machinist	OKC	$13.50/hr+DOE	2nd Shift - Pay depends on experience.  Willing to consider all levels of experience including entry level.  Will run CNC lathe and mills, must be able to demonstrate proficiency in applying basic machining principles and use of precision measuring equipment. Must be able to understand basic machining principles and be able to pass CNC machinist test. Will need to be able to read tape measure and blueprints. Steel-toed boots are required. Must be able to lift 50lbs. Requires Vo-tech training on CNC and knowledge of cutting tool applications.
CNC Machinist	OKC	$14-19/hr+DOE	Need Lathe and Mill Machinist who can set up and operate 3,4 or 5 axis milling machines or lathes. Duties include: Setting up and operating CNC equipment. Using tool call and tool offset codes. Setting tool lengths. Editing programs. Use work offsets/work coordinates. Identifying proper tooling. Measuring and inspecting parts. Reviewing/following job planning. Entering production information. Maintaining accuracy of job planning data. Experience with FANUC controls. Proficient with precision measuring instruments. Strong math skills/familiar with GD&T. Proficient reading/interpreting blueprints. Effective interpersonal skills. Strong time management skills. Effective communication skills.
CNC Machinist	OKC	$17-18/hr+	Sets up and operates conventional, special purpose, and CNC machines and machining centers to fabricate metallic and non metallic parts. Four years CNC Lathe experience, 2 years CNC Vertical Mill experience, must be able to cross train to Horizontal Mills if necessary. Must be able to work with very little supervision. Must be able to do own set ups when required. Must be able to QC own parts. Must be able to read blue prints, have high school or equivalent education and good math skills.
Directional Drillers	OKC	$13+DOE	Need Directional Drillers with underground cable boring experience. Experience with drilling in angles and knowledge of locating system a plus. Will run boring/trenching machines, pull cables, backfill holes, etc. Must be able to work outside in all types of weather. Company is working a lot of mandatory overtime. Must have a valid drivers license, able to lift up to 50lbs and have steel-toed boots. Hard hat is MANDATORY on all jobsites, Client will provide.
Fab Techs	OKC	$11/hr	Need (2) for 1st Shift and (1) for 2nd Shift. This job will pay $1.25 shift difference for 2nd Shift. Looking for experienced Fab Techs, will consider training the right person. Must be able to read a tape measure and blue prints. Person will need to have steel-toed boots and able to lift 70lbs. Work is done on Structural Steel using Arc, Fluxcore, and Mig welding. Will work Monday through Friday. Overtime is mandatory.
Fitter/Welders	OKC	$13/hr+DOE	2nd shift pays $1.25 shift differential. Looking for experienced Fitters/Welders. Must be able to read tape measure and blue prints. Person will need to have own welding gear and steel-toed boots. Weld is done on Structural Steel using Arc, Fluxcore and some Mig. Must be able to lift 70lbs. Minimum 5 years experience required. Overtime is mandatory.
GENERAL LABOR	OKC	$8/hr + DOE	JOBS, JOBS, JOBS - Lots of openings.  No experience necessary will train.  Valid IDs required.
Industrial Maintenance	OKC	$16 to $18/hr DOE	Must have extensive facility/production maintenance experience.  Will repair, maintain and troubleshoot various types of processing machines, conveyors and grinders.  Must have strong electrical knowledge.  Must own tools and steel toed boots.  Will train on 1st shift, but work 2nd shift after training. OSBI, Drug Screen and Audiogram required before hire.
Industrial Painter	OKC	$10-11/hr+DOE	Need (1) for 1st Shift and (1) for 2nd Shift. Looking for Industrial Painter with some experience working with Structural Steel. Must pass painter's physical/respirator test will be given prior to hire. Some knowledge of Prep and Paint using Airless Paint will be required. Job will also require some Grinding, Sanding and Blasting. Steel-toed boots are needed. Must be able to read a tape measure and lift 70lbs. Will work Monday through Friday. Overtime is mandatory.
Inspector	OKC	$12/hr	Inspect materials received, work in process, and finished products to ensure, conformance to purchase order requirements, manufacturing, and process specifications. Verifying physical properties and size of materials such as plates, sheets, structural shapes, etc. to include hardness and conductivity as per customer specifications. Follow established procedures to perform receiving inspections. Follow established procedures to initiate nonconforming materials reports for customer or internal disposition. Notify Warehouse Supervisor and Purchasing of any discrepancies. Examining machined parts to ensure conformance with customer purchase order requirements and specifications. Verify all documentation. Use inspection tools, blueprints, customer data, and process specifications to identify quality parts. Follow established procedures to initiate nonconforming materials reports for customer or internal disposition. Ensure proper documentation of machining dimensions, process certs, assembly specs and part identification. Perform accurate shop management transactions to record activity. Monitor and document first articles accurately. Entry level with Manufacturing experience is ok.
Maintenance Engineer(Floor)	OKC	$18/hr+DOE	Second shift position that will train on first shift. The individual will perform maintenance functions on machines and equipment as needed. This position requires someone with a strong electrical, pneumatic, and hydraulic experience. Refrigeration experience is a plus.
Maintenance Mechanics	OKC	$20-25/hr	Looking for person to handle maintenance of CNC and Manual Machines along with upkeep of facility. Should have at least 5 years experience with troubleshooting and repairing mechanical and electrical aspects of CNC Equipment. Knowledge of Fanuc Controls, have computer experience both in general and CNC related. Use multi-meter and other related tools. Will also repair, maintain, and troubleshoot equipment such as; Production Machines, Conveyors, Lathe and Mill machines, etc. Person must have Electrical, hydraulic, pipe fitting, welding, insulating, and installing of new equipment knowledge. Must be self-motivated, have a positive attitude and be able to work as part of a team. Will need to own steel-toed boots  and able to lift up to 100lbs occasionally. Will work Monday through Friday 7-4 with overtime being mandatory and some Saturdays will be required.
Maintenance Technician	OKC	$13/hr	This is a 2-3 days a week job. Times and hours will be determined. Will go to all the store locations and do minor maintenance. Replacing light bulbs, fixtures, cabinets, handles, filters, etc. Not electrical or HVAC maintenance related.
Manual Lathe Machinist	OKC	$14-18+DOE	Must be able to work in a fast paced environment. Person must be very detailed, able to work with little supervision. Must have experience with Manual Machine doing set-ups and operating. Company uses Lathe horizontal and vertical machines. Need to have 3-5 years experience with manual machining. Someone with supervisor/Leadman experience able to train would be a plus. Need to be able to read a tape measure and blue prints. Knowledge of Calipers and Micrometers required and they must have their own tools. Tool and Die experience would be a plus. Must be able to lift 50lbs and have steel-toed boots. They ability to communicate and follow instructions is vital to this position. Will work Monday through Friday 7-4 with mandatory overtime.
Mechanical Assembly	OKC	$11.25/hr	2nd shift pays $1.00 shift difference. Previous Mechanical Assembly experience required. This location is a climate-controlled environment. Candidate will be expected to perform several different types of equipment assembly to include; Pumps, Motors, Lead Cables, Starter Winding and Shaft Straightening. Must have basic math skills and prior manufacturing experience required. Prior Blue Print reading and use of measuring instruments a plus.  Must have steel-toed boots and able to lift 40lbs. Will work Monday through Friday 3:30PM to 12:00AM. Some overtime may be required.
Mechanical Assembly Install	OKC	$12/hr	This company produces custom Cherry Picker (bucket lifts) for several clients. Will work Friday, Saturday and Sunday, 12 hour days (36 hours) but will be paid for 40 hours. Pay will increase when candidate rolls to clients payroll. Need mechanically-inclined assembly people for the Truck/Van Conversion department. This department installs shelving, ladder grips, tool boxes, hitches and decals to all vehicles produced. Some welding and electrical knowledge is a plus. Will need to have own tools. Must be able to read a tape measure and blueprints. Must be able to lift 50lbs and wear steel-toed boots.
Mechanical Assembly/Motor Builders	OKC	$11.25/hr	Previous Mechanical Assembly experience required. They will train how to rebuild Motors, Pumps, etc. Candidate will be expected to perform several different types of equipment assembly to include; Pumps, Motors, Lead Cables, Starter Winding and Shaft Straightening. Must have basic math skills and prior manufacturing experience required. Some welding experience a+. Prior blue print reading and use of Measuring Instruments a plus. Must have steel-toed boots and able to lift 40lbs.
Mig Welders	OKC	$13/hr+DOE	This company produces Cherry Picker (bucket lifts) for different companies around OKC area. Need prior experience with some Mig some Stick Welding. Will need to have own Welding Gear and tools. Must be able to read tape measure and blueprints. Must have good work history and reliable transportation. Must have a valid Driver's License. Will work Monday through Friday 6:00am to 3:30pm. Lots of Overtime is required.
Process Pipe Welders	OKC	$17-19/hr+DOE	Process Pipe welders will be fitting and welding process pipe for natural gas transfer. This will require excellent fit up capabilities along with excellent pipe welding skills. They will be welding in accordance with B31.3 welding specifications. These welders will be required to pass an X-Ray test to be qualified to be a process pipe welder. The pipe sizes they will be working with will be 2"-4" sch80 through XX heavy. Must have at least 2 years Mig experience, able to use a cutting torch. Will need steel-toed boots and able to lift 50lbs. 1st Shift Monday through Friday 5:30AM to 3:00PM with some overtime required. 2nd Shift Sunday through Thursday 2:30PM to Midnight with some overtime required. There is no shift differential offered.
QC Inspector	OKC	$18+DOE	Candidates must have Welding/Fabrication background. ASME welding code knowledge. Must be familiar with API/ISO QC standards and terminology. Duties also include ASME or API/ISO audit preparation. Position requires 5+ years in manufacturing environment, proven vendor interaction skills, able to act as liaison to customer/vendor on QC matters. Person must have computer experience, knowledge with network based QC programs and functions expected. Must have a HS diploma, able to lift 50lbs and have steel-toed boots. The right candidate must be able to work overtime when necessary, willing to travel when required and ensure safety procedures are always implemented. Someone with 5+ years in QC supervisory role would be a plus.
Sanitation Workers	OKC	$11/hr	This is a Food Processing Plant. D39 Plant is kept around 40-45 degrees at all times. This position requires using high pressured hoses, mops, brooms and other machinery used to scrub down all areas of the plant. Must be able to lift 50lbs. Company will provide water-proof clothing and boots for the candidates to wear. Must have good work history, reliable transportation and willing to work on weekends. Must be able to work Mandatory overtime.
Structural Welders	OKC	$14-16/hr+DOE	Structural Welders will fit up structural members and sheet metal members and weld them into place. Structural members consist of I-Beam, Channel Iron, Angle Iron and Pipe. Sheet metal members will be flat plate ranging in thickness from 1/8" to 3/8". Seam welding is required on most sheet metal applications. Examples of structural sub assemblies will be skids, cabinets, some pipe for smoke stacks etc. All welder candidates must be able to read and interrupt blue prints and read tape measure. All candidates must have at least 2 years Mig experience, and able to use a cutting torch. Will need steel-toed boots and able to lift 50lbs. 1st Shift: Mon-Fri 5:30AM to 3:00PM with some overtime. 2nd Shift: Sun-Thurs 2:30PM to Midnight with some overtime required. No shift differential is offered.
Warehouse/Driver	OKC	$9-11/hr	Will deliver mattresses to clients on short trips to Tulsa, Duncan and edge of Texas 1 to 3 times per week. Will drive flatbed truck (standard) and will load unload product. Remainder of time will be spent working in the plant doing wrapping, gluing, and learning the business as well as other warehouse duties. Must be dependable. Must have a valid OK DL and a clean MVR. Knowledge of techniques, rules and laws for safe vehicle operation and maintenance procedures. Previous delivery experience helpful, woodworking experience is a plus. Must be able to drive a Standard.
Welder - Pressure Vessel Fitter/Welder	OKC	$16/hr +DOE	3-5 years experience in a vessel shop required.  Must pass 3G, visual and x-ray test. Written fitters test will also be required. Mig, Stick, Fluxcore and arc gouge experience required.  Must know how to weld on carbon and stainless.
Welders	OKC	$12+DOE	Looking for experienced Welder, structural experience is a plus. Must be able to read a tape measure and blue prints. Person will need to have own Welding gear and steel-toed boots are required. Weld is done on Structural Steel using Arc, Fluxcore, and some Mig. Overtime is mandatory. Must be able to lift 70lbs.
Winding Assemblers	OKC	$11.25/hr + Shift difference	2nd shift pays $1 more per hour. Very repetitive work. Person will sit on a stool in front of a Pump Rod and push strands of wire through designated holes while a partner pulls the wire through the other end. The average is to complete 3-4 rods per day. Need people that can do repetitive work and able to sit for long periods of time. Position requires good hand/eye dexterity. Must have steel-toed boots and able to lift 30lbs. Will work Monday through Thursday 3:30PM to 2AM. Some overtime mandatory on Fridays.

INDUSTRIAL JOB OPENINGS